Home / Blog
The print room blog
How printed parts behave, what goes wrong and how to fix it, written from the printers in Winter Park.
- Nov 16, 2026PETG vs ASA: which one should the part be?Heat limit, sun and weather, strength, print difficulty and cost, side by side, with a plain rule for picking between them.
- Nov 14, 2026Should you print a lithophane flat or vertical?Vertical, almost every time. The numbers behind it, the three cases where flat is the right call, and how to stop a tall thin panel from wobbling.
- Nov 13, 2026Can you 3D print an intake?Cold-air ducts, airbox lids and velocity stacks can be printed, but only in a plastic that takes engine-bay heat. Which parts work, which plastic, and where printed intakes fail.
- Nov 12, 2026Can you 3D print a body kit?Lips, skirt extensions, diffuser fins and canards: yes, in sections. Whole bumpers and fenders: not on a desktop printer. What works, how it's joined and how to finish it.
- Nov 12, 20263D printed car accessories: the listThirty car accessories that are worth printing, sorted by where they go in the car, with the plastic each one needs to survive the heat.
- Nov 12, 20263D printed cup holder inserts, expanders and adaptersBottle too big, can too small, or a holder you never use: the four cup holder fixes worth printing, how to measure yours, and the plastic that survives a hot console.
- Nov 12, 2026BMW 4 Series Gran Coupe front lip: build logA front lip for the G26 Gran Coupe, printed in 11 sections and hung from the car's own screws. Where the design is, the first test print that failed, and what changed because of it.
- Nov 12, 2026Can you 3D print a front lip?Yes, in sections. How a lip gets split to fit the printer, how the pieces lock together, which plastic to use, and the real numbers from the BMW 4 Series Gran Coupe lip on the bench here.
- Nov 12, 2026Sim racing button box wiring, pin by pinWhich wire goes to which pin on a Pro Micro for 8 buttons, 3 toggles and 2 encoders, the complete sketch to flash, and how to track down a switch that does nothing.
- Nov 10, 2026Bambu Lab H3C: what nine toolheads change for your partsH3C printers are on their way to the shop. Nine toolheads, a heated chamber and a bigger build area: here's what each one means for a part you'd actually order.
- Nov 10, 2026The best filament for lithophanesOrdinary white PLA beats everything fancier. Why clear, silk and coloured filaments give worse photos, and a ten-minute test for any spool.
- Nov 10, 2026Color lithophanes: how they workA colour lithophane is a normal white one with thin cyan, magenta and yellow layers behind it. What printer it takes, what goes wrong, and when plain white still looks better.
- Nov 10, 2026How to make a lithophane from a photoPick the photo, run it through a free lithophane maker, print it standing up in white PLA. The steps, the settings that matter and the mistakes that ruin them.
- Nov 8, 2026Can you 3D print car parts?Trim clips, covers, gauge pods and knobs: yes. Anything that keeps you on the road or holds you in a crash: no. Here's where the line is, and which plastic survives a Florida dashboard.
- Nov 8, 2026Christmas gifts for car people and gamersThings they don't already own, made for their car, their setup or their dog. Sorted by who it's for, from $9.
- Nov 7, 2026PLA vs PETG vs ASA in a hot carA dashboard in the Florida sun runs hotter than PLA can take. Which filament goes where in a car, with the numbers.
- Nov 7, 2026How to build a sim racing button boxThe parts list, Pro Micro vs a plug-and-play board, wiring 13 controls without a matrix, and getting it working in iRacing and ACC.
- Nov 7, 2026What is a lithophane, and which photos make a good one?A photo printed in plain white plastic that only shows up when it's lit. How it works, and the photos that print well (and the ones that don't).
- Nov 7, 2026What is a Z seam, and how do you hide it?The line where every layer starts and ends. Why it shows, what Aligned, Nearest, Back and Random really do, and the fixes that work.
- Nov 5, 2026How much does 3D printing cost?The real formula a print shop uses: grams, machine hours, setup and quantity breaks, with worked examples.