The four fixes
| Insert | Problem it solves | How it works |
|---|---|---|
| Expander | A 32 or 40 oz insulated bottle won't go in | A plug sized for your holder with a wider cup on top. A slot in the side clears a mug handle. |
| Reducer | A slim can or small coffee cup tips and rattles | A sleeve that drops in and narrows the holder. TPU makes it grip. |
| Catch-all tray | A holder you never use for drinks | A tapered plug with an open tray on top for keys, coins, earbuds and the garage remote. |
| Replacement insert | The factory liner or divider is lost or broken | Copied from the original, or from the empty hole if it's gone. |
How to measure your holder
Cup holders taper, so one number isn't enough. Three measurements get an insert that fits the first time:
- Top diameter, straight across the opening.
- Bottom diameter, across the floor of the holder.
- Depth, floor to rim.
Then note anything that sticks in: spring tabs, a rubber liner, a step halfway down. For an expander, add the diameter of the bottle's base. A photo looking straight down with a ruler across the top covers most of it.
Most round car cupholders fall between 66 and 80 mm across, which is why a tapered plug with ribs works in so many of them: the taper finds its own depth and the ribs take up the slack.
What makes a good one
- A taper that matches. A straight-sided plug in a tapered holder rocks. The plug should follow the holder's own angle.
- Ribs, not a tight fit. Thin ribs around the plug crush slightly and stop rattles, and they forgive a millimetre of error.
- Weight down low. An expander carrying a full 40 oz bottle is top-heavy. The plug needs to reach the floor of the holder, and a tall one should be a snug fit.
- A drain or a wipeable floor. Condensation and spills collect at the bottom.
Plastic
The centre console of a parked car gets hot, and PLA inserts are known for slumping into the holder over a summer. PETG is the right choice: it keeps its shape in cabin heat and doesn't mind coffee or cola. For a liner or a reducer that needs grip, TPU is the rubbery option. More on the heat numbers in PLA vs PETG vs ASA in a hot car.
Ready-made and made-to-measure
The catch-all tray in the shop fits round holders from about 66 to 80 mm with no measuring. Expanders, reducers and replacement inserts are drawn for your holder: send the three measurements and what you want it to hold.


