Winter Park 3D printing, one layer at a time.
Broken clip, a prototype for Thursday, or 300 of the same bracket. Drop the file in, see the price, and a real person in Winter Park prints it and brings it to you.
Local delivery in Orange County · pickup by appointment · shipping US-wide
Christmas gifts, printed to order
Shop Christmas gifts
Personalized photo ornament
Personalized license plate ornament
Christmas keycaps set (4 keys)
Gaming station: 2-controller and headset standPersonalized pieces are made after you approve a preview. Order by Dec 12 for Christmas.
What comes through the door
Almost every job is one of these four. Each one runs a little differently, so each has its own page.
-
01
dishwasher_rack_clip.stlfrom a photo + calipers
Replacement parts
The part nobody sells anymore. Send photos (or mail the broken one), and it gets measured, modeled and printed in something tougher than the original.
PRINTING -
02
enclosure_rev7.step3 revisions this week
Rapid prototyping
Hold the idea in your hand before you pay for tooling. Print, test, change the CAD, print again.
QUEUED -
03
cable_clip_x250.3mfbatch · reorder every quarter
Production runs
Ten to a few hundred identical parts with no mold, no minimum stock, and the same file every time you reorder.
QUEUED -
04
your_file.stlanything else
Your own model
Downloaded it, designed it, or a friend sent it. If it fits on the plate and the geometry is printable, it can be printed.
WAITING
Drop a file, get a number
Your STL is read right here in the browser: size, volume, how much filament it takes and roughly how long it runs. Change the material or quantity and the price moves with it.
Instant estimate
No file yet? . This is an estimate from your file's geometry. Printing only. Modeling from photos is quoted separately (from $75). A person checks every job and sends a firm price before anything prints. How the number is worked out.
Like the number? Send it.
The file and your settings come along with the request. You get a firm price back. Nothing prints until you say yes.
No STL? Describe the part and attach photos instead.
Pick the plastic for where it lives
Florida is hard on plastic. A part that is fine on a desk can sag on a dashboard in July. Choose by heat, sun and flex, not by colour.
PLA
indoor · rigid · cheapest
Display pieces, test fits, desk organisers. Softens around 55–60 °C, so never in a car.
PETG
the default · tough · water-safe
Clips, brackets, garden and pool parts. Tougher than PLA and doesn't mind getting wet.
ASA
outdoor · sun · heat
Car interiors, boat parts, anything that sits in the sun. Holds shape well past PETG.
TPU
rubbery · grips · seals
Gaskets, bumpers, feet, phone-mount pads, anything that has to bend and come back.
Nylon CF
stiff · strong · engineering
Jigs, fixtures, load-bearing brackets. Carbon fibre makes it stiff and gives it a matte finish.
When 3D printing is the wrong call
Just because something can be printed doesn't mean it should be. If one of these is true, you'll hear it before you pay a cent.
- You need thousands, forever. Past a few thousand identical parts, an injection mold usually wins on unit cost. Printing is how you get there: prove the design, then tool it.
- It carries a person or a critical load. Seat hardware, climbing gear, brake or steering parts. These need certified metal parts, not plastic.
- It touches food long-term or goes in the dishwasher. Layer lines trap bacteria. Cookie cutters for a weekend are fine, a daily cutting board is not.
- It has to hold tolerances tighter than a few tenths of a millimetre. Bearing bores and threads that must seal are better machined, or printed with a machined insert.
New machines on the way
Two additions are being set up in Winter Park. Neither is taking jobs yet. You can send a part for either one now and it's queued for when they start.
Nine toolheads and a heated chamber: rigid and rubbery plastic in one part, bigger ASA and nylon parts that stay flat, and a build area of about 330 × 320 × 325 mm. What the H3C changes for your parts.
For the parts plastic can't do: heat, torqued threads, thin sections under load. Requests are open, and you'll be told first if plastic would do the job for less. Metal 3D printing in Orlando and Winter Park.
Printed in Winter Park, delivered across Orange County
No storefront, no counter. Files and photos come in online, and finished parts go out by mail: one to three days across Greater Orlando, a little longer to Scranton and Northeastern Pennsylvania.
| Where you are | How you get it | Notes |
|---|---|---|
| Winter Park | delivery or pickup | Where every part is printed. Pickup is by appointment. |
| Orlando and Orange County | local delivery | Dropped off once it's done, at a time that suits you. |
| Seminole County and nearby | local delivery | Maitland, Altamonte, Winter Springs, Oviedo and nearby. Not sure you're in range? Ask on the quote. |
| Rest of Central Florida | shipped, 2–3 days | Kissimmee, Sanford, Clermont, Daytona, Melbourne. |
| Scranton & NEPA | shipped, 3–5 days | Ground shipping, same print price as Florida. |
| Anywhere else in the US | shipped, 2–5 days | Shipping is its own line on the quote. |
The short version
Z-Seam is a one-person 3D print shop in Winter Park, Florida, run by Nick Lipinski.
| Where | Printed in Winter Park, FL. Delivered across Orange and Seminole counties, picked up by appointment, or shipped anywhere in the US. |
| How long | Printing takes 2 to 5 business days. Shipped orders take about 2 to 6 more in transit. |
| What it costs | Custom jobs start at $35, priced from the plastic and machine time. Shop parts have their own prices. The formula is published. |
| Delivery | Free locally over $35, $6 under that. Pickup is free. US shipping is $6 for most single parts. |
| No file? | Parts are drawn in CAD from photos, a sketch or the broken original. |
| Returns | 14 days on shop parts. Shipping and returns. |
Questions people send first
Do I need a 3D file to get something printed?
No. Send photos of the broken part with a ruler or calipers in frame, or post the part itself, and it can be measured and modeled before printing. Modeling time is quoted separately, before any work starts.
Which file types can I upload?
STL gives an instant estimate right on this site. STEP, 3MF, OBJ and photos are welcome too; those are priced by hand.
How do I get my part?
Three ways. It's delivered to you anywhere in Orange County and the surrounding areas, you pick it up in Winter Park by appointment, or it ships anywhere else in the US, including Scranton and Northeastern Pennsylvania. There's no storefront, so pickups are booked ahead.
Are 3D printed parts strong enough to actually use?
With the right material and orientation, yes. The weak direction of a printed part is between layers, so it gets printed on its side when that matters. PETG, ASA and carbon-fibre nylon are used for working brackets, clips, housings and fixtures. If a part would be better machined or molded, you'll be told before you pay.
Do you do metal 3D printing?
It's being added and isn't running yet. Send the part now and it gets looked at: you'll hear whether it needs metal at all, and you're first in line when metal jobs open. More on metal 3D printing.
Why is the instant price a range?
The tool knows your part's geometry but not how it should be oriented, whether it needs supports, or how it will be finished. A person checks those and sends one firm number. The full formula is published here.