Printing vs a mold, honestly
| 3D printed batch | Injection molded | |
|---|---|---|
| Up-front tooling | none | a mold, often thousands of dollars or more |
| Cost per part | higher, flat | very low once the mold is paid off |
| Design change | edit the file | modify or remake the mold |
| Lead time for the first part | days | weeks |
| Stock you hold | only what you order | usually a large minimum run |
| Wins when | volume is low or the design still changes | volume is high and the design is final |
The crossover point depends on the part. If your numbers say mold, you'll hear it.
How repeat orders work
;BATCH 1First run is checkedThe first part gets measured and signed off by you before the rest of the batch prints.;SAVESettings are lockedFile, material, colour, orientation and slicer profile are stored under your part number.;BATCH NReorder by part numberSend a quantity. The same profile runs, so part 400 matches part 1.
Good fits for batch printing
- Small-brand productsaccessories, mounts and organisers sold online
- Shop fixturesassembly jigs, drill guides, go/no-go gauges
- Event and retaildisplay holders, sign stands, branded giveaways
- Maintenance sparesthe clip that breaks every quarter, kept on file