Home / Services / Replacement parts

The part they stopped making

A snapped dishwasher rack clip. A blind bracket from 1998. The knob on a boat console. If it's plastic and you still have it, even in pieces, it can usually be remade, often stronger than the original.

You sendphotos, or mail the part
Measured withcalipers + test fits
Modelingfrom $75, approved first
Filekept, reprints cost print only
Usually printed inPETG · ASA · nylon

How it works

  1. G28
    Photos, or the part itselfShoot it from the top, the side and the end with a ruler in frame, plus one photo of where it lives. Simple parts can be quoted from photos alone. For complex ones you'll be asked to mail the part (or the pieces) in. It comes back with the new one.
  2. M0 MEASURE
    Measured and modeledEvery critical dimension gets measured: hole spacing, clip depth, the angle of the latch. Then it's redrawn in CAD, fixing the weak spot that made it break in the first place where that's possible.
  3. M117 QUOTE
    One price, approved firstYou get a single number covering modeling and printing. Modeling is the bigger share on a one-off (simple clips and knobs start at $75); every copy after that is just print time.
  4. G1 FIT
    Print, test fit, doneIf the first one is a hair tight, adjusting it is part of the job. The model file stays on record, so the next time it breaks, a reprint is quick.

Things that come in most

  • Appliance partsdishwasher rack clips and wheels, fridge door shelf brackets, dryer knobs, vacuum clips
  • House hardwareblind and shutter brackets, cabinet shelf pegs, curtain rod ends, screen-door rollers
  • Pool and yardskimmer and pump clips, irrigation fittings, hose-reel parts, lanai screen spline tools
  • Cars and boatstrim clips, cupholder inserts, console knobs, cleat and rod-holder caps (in ASA)
  • Shop and officemachine guards, chair parts, label holders, cable management
  • Hobby and vintageradio and amp knobs, toy and model parts, camera and gear caps

What can't be replaced this way

Parts that hold a person's weight, anything in brakes, steering or fuel systems, pressure fittings, and parts that need to be food-safe for daily use. Those need a certified original or a machined metal part. If your part is one of them, you'll be told so and pointed in the right direction.

Why printed can beat the original

Mass-produced clips are molded from the cheapest plastic that survives the warranty. A remade part can be printed thicker where it cracked, in a tougher material, with layers oriented so the load runs along them. Most remade clips outlast the one they replace.